Three-station rail joint fatigue testing machine

The PMW800-1500 rail fatigue testing machine mainly includes 1 PMW800 pulsating hydraulic station, 1 PMCS2.0 fully digital measurement and control system, 3 500kN high response low damping actuators, 1 three-station reflexive force loading frame, and WinPmw5. 0 It consists of 1 set of computer data acquisition and processing system, 3 sets of safety protection devices, 6 sets of loading tooling, etc.

Three-station sleeper fatigue testing machine

The PMW800-1500 sleeper fatigue testing machine mainly includes 1 PMW800 pulsating hydraulic station, 1 PMCS2.0 full digital measurement and control system, 3 500kN high response low damping actuators, 1 three-station reflexive force loading frame, and WinPmw5. 0 It consists of 1 set of computer data acquisition and processing system, 3 sets of safety protection devices, 6 sets of sleeper fatigue test loading equipment, etc.

TPW-6 six-station railway clip fatigue testing machine

TPW-6 variable frequency speed control six-station elastic bar fatigue testing machine is a new type of variable frequency speed control displacement control eccentric push-pull multi-station elastic bar fatigue testing machine jointly developed by Jinan Force Support Testing System Co., LTD and China Academy of Railway Sciences. The testing machine meets the "TB/T2329 clip I, clip II fasteners fatigue test Method", the transport base line [396] "clip III fasteners supply technical conditions II", "WJ-7 fasteners parts Manufacturing acceptance interim technical conditions", "Clip IV fasteners parts Manufacturing acceptance Interim Technical conditions", "clip V Temporary Technical Conditions for Manufacturing Acceptance of Type I A, type I B, type II, type III, type W1, type W2, type X2, type X3, type C4 elastic bar fatigue test requirements.

Fastener assembly fatigue testing machine

PMW800-250 fastener assembly fatigue testing machine mainly includes 1 PMW800 pulsating hydraulic station, 1 PMCS2.0 full digital measurement and control system, 1 250kN high response low damping actuator, 1 gantry loading frame, and WinPmw5.0 computer It consists of 1 set of data acquisition and processing system, 1 set of safety protection device, 1 set of fastener assembly fatigue test loading tooling, etc.

Microcomputer controlled electro-hydraulic servo rail static bending testing machine

WGW-3000 microcomputer-controlled electro-hydraulic servo rail static bending testing machine is designed by Jinan Force Support Testing System Co., Ltd. according to the requirements of the 9th static bending test method of TB/T1632.1-2005 Rail welding Part 1 General Technical Conditions. The new type of rail static bending testing machine is developed by industrial control computer and electro-hydraulic servo valve control technology of MOOG Company. LZGW-3000 microcomputer controlled electro-hydraulic servo rail bending testing machine meets the requirements of TB/T1632.1-2005 "Rail Welding Part 1: General Technical Conditions", GB/T2611-92 "General Technical Requirements for testing machine" and GB/T16826-1997 "Electro-hydraulic universal Testing Machine".

Rail drop weight impact testing machine

GLW-112000J rail drop hammer impact testing machine is a fully automatic rail and rail welded joint drop hammer impact testing machine jointly developed by Jinan Force Support Testing System Co., Ltd. and China Railway Inspection and Certification Center of China Academy of Railway Science. The products meet GB2585 "Hot-rolled rail for Railway" 7.7 drop weight test, GB/T1632.1 "Rail welding Part 1 General technical conditions" article 9 drop weight test method, TB/T2344 "43kg/m ~ 75kg/m rail ordering technical conditions", "350km/h passenger special line 60kg/m Provisional Technical Conditions for Rail, Article 5.6 Technical requirements for drop hammer test.

Microcomputer controlled electro-hydraulic servo rail longitudinal tension and compression testing machine

WGLY-2500*2 microcomputer-controlled electro-hydraulic servo rail longitudinal tensile and compression testing machine is a kind of high-precision testing equipment specially used for rail longitudinal tensile and compression test. It was developed by Jinan Force Support Testing System Co., Ltd. for the State Key Laboratory of high-speed Railway Track Engineering of China Academy of Railway Sciences. This set of testing machine adopts servo control hydraulic cylinder loading, load adaptability low power servo oil source, two-way forced clamping mechanism, dual high-pressure forced clamping special oil source, load sensor force measurement, photoelectric encoder displacement measurement, German Bosch servo valve and industrial control machine automatic closed-loop control, automatic display print output test results and other advanced technologies. Automatic closed-loop control of test force and displacement can be realized.

Spring pulsation fatigue testing machine

The PMW800-150 spring fatigue testing machine mainly includes 1 PMW800 pulsating hydraulic station, 1 PMCS2.0 full digital measurement and control system, 1 150kN high response low damping actuator, 1 portal loading frame, and WinPmw5.0 computer data collection It consists of 1 set of processing system, 1 set of safety protection device, 1 set of spring fatigue test loading tooling, etc.

Microcomputer controlled electro-hydraulic servo bridge telescopic device testing machine

SSFT-1200 microcomputer controlled electro-hydraulic servo bridge expansion device testing machine, It is made by Jinan Force Support Test System Co., Ltd. according to the technical requirements of the People's Republic of China transportation industry standard JT/T327 "Highway bridge expansion device", "JTQX-2 modular expansion device general technical conditions", "JT/T723 unit multi-directional displacement comb-plate bridge expansion device" and so on. Under the guidance of experts from the Highway Science Research Institute of the Ministry of Transport, the newly developed overall mechanical performance test equipment of bridge expansion device is developed. The testing machine adopts the advanced multi-channel electro-hydraulic servo coordinated loading control technology in the field of static test technology at present, and has the functions of micro-computer-controlled multi-channel coordinated automatic loading and automatic test data collection and processing. It is suitable for the overall mechanical property test of highway bridge expansion device within 1200mm and the waterproof test of rubber seal belt.

Microcomputer controlled electric servo bridge telescopic device test bench

SFSS-400 microcomputer controlled electric servo bridge expansion device test bench, According to the People's Republic of China transportation industry standard "JT/T327-2016 Highway bridge expansion device general technical conditions", the expansion device appearance quality, dimensional deviation, welding quality, surface coating quality, assembly tolerance, deformation performance, waterproof performance and other technical requirements. The newly developed microcomputer controlled electric servo bridge expansion device test bench. The equipment adopts electronic servo technology, computer control, high control precision, simple operation, stable performance. Servo electric cylinder loading, green environmental protection, no cooling equipment, low carbon energy saving.

Microcomputer controlled electro-hydraulic servo damper performance test bench

WAZD-4500 microcomputer controlled electro-hydraulic servo damper performance test bench is a new product specially developed by our company according to the technical requirements of damping damper performance test in the field of construction engineering. It adopts professional core technologies such as ultra-high stiffness pre-anti-backlash frame loading host, large array hydraulic accumulator and ultra-large flow electro-hydraulic servo pump station, multi-channel full closed-loop servo controller, static pressure support heavy-duty servo cylinder. The product performance is stable and reliable, and has been praised by high-end customers such as China State Shipbuilding Group.

Automobile axle fatigue testing machine

PMW400/800/1600 axle fatigue testing machine is manufactured by Jinan Lizhi Testing System Co., Ltd. according to "GB/T19844 Leaf Spring", "QC/T513 Automobile Front Axle Bench Fatigue Test Method", "QC/T533 Automotive Drive Axle Bench" It is the latest vehicle axle static stiffness and fatigue life testing equipment developed in accordance with relevant standards for axles, chassis, and suspension in the automotive industry such as "Frame Test Method" and "JT/T475 Trailer Axle".